 |
 |
DM Type
|
|
|
DM-type Inter-Connector is made up of silicone rubber and ised as a protective presser foot or a spacer. The material, hardness, or additional specification (with adhesive/adhesive tape) can be custom-made.
|
|
Outline Dimensions: |
 |
|
Material Dimensions: |
 |
|
| Item |
Unit |
SS-20 type |
SS-50 type |
W-70 type |
SPH-151 type |
| Colour tone |
|
Translucent,Gray,Black |
Translucent,Gray,Black |
White,Gray |
White |
| Shore hardness A |
|
20º |
50º |
70º |
8º |
| Silicone rubber |
|
Solid insulative |
Solid insulative |
Solid insulative |
Sponge insulative |
| Remarks |
|
Counterpart of SS-type |
|
|
|
| Length |
mm |
1.0~370.0 |
1.0~370.0 |
1.0~290.0 |
1.0~370.0 |
| Height |
mm |
1.0~250.0 |
1.0~250.0 |
1.0~250.0 |
1.0~250.0 |
| Width |
mm |
0.2~6.0 |
0.2~6.0 |
0.3~5.0 |
0.8~5.0 |
| |
| Item |
Unit |
SPO-951 type |
UL-50 type |
NA-50B type |
VO-50 type |
| Colour tone |
|
Pink,Black |
Light Gray |
Gray |
Black |
| Shore hardness A |
|
20º |
50º |
50º |
50º |
| Silicone rubber |
|
Solid insulative |
Sillicone rubber |
Sillicone rubber |
Sillicone rubber |
| Remarks |
|
Counterpart of SG-type |
Flame resistance |
Tape |
Tape |
| Length |
mm |
1.0~370.0 |
1.0~370.0 |
1.0~400.0 |
1.0~400.0 |
| Height |
mm |
1.0~250.0 |
1.0~250.0 |
1.0~250.0 |
1.0~250.0 |
| Width |
mm |
0.4~6.0 |
0.2~6.0 |
0.1~0.5 |
0.1~0.5 |
*H W/2
Shin-Etsu Inter-Connector has been registered in European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
|
 |
 |
Basic Properties and Material Tolerances: |
 |
|
| Item |
Unit |
SS-20 |
SS-50 |
W-70 |
SPH-151 |
| Specific gravity |
|
1.10 |
1.15 |
1.20 |
0.6 |
| Tensile strength |
(Mpa) |
2 |
6.0 |
6.8 |
1.8 |
| Compression set |
(%) |
300~400 |
250~400 |
180~250 |
350 |
| Shore hardness A |
|
20±5 |
50±5 |
70±5 |
8±5 |
| Compression set |
(%) |
5~15 |
5~15 |
5~15 |
30 |
| Volume resistivity |
(M ) |
8×1011 |
8×1011 |
1×1012 |
1×109 |
| Insulation resistance |
( ) |
109 |
109 |
109 |
109 |
| Operating temperture range |
('C) |
-25~85 |
-25~85 |
-25~85 |
-25~85 |
| Dielectric breakdown voltage |
kV/mm |
23~27 |
23~27 |
23~27 |
20~25 |
| |
| Item |
Unit |
SPO-951 |
UL-50 |
NA-50B |
VO-50 |
| Specific gravity |
|
0.7 |
1.50 |
1.15 |
1.30 |
| Tensile strength |
(Mpa) |
2.8 |
4.5 |
6.0 |
4.5 |
| Compression set |
(%) |
250 |
350 |
250~400 |
300 |
| Shore hardness A |
|
20±5 |
50±5 |
50±5 |
50±5 |
| Compression set |
(%) |
10~20 |
40 |
5~15 |
40 |
| Volume resistivity |
(M ) |
1×109 |
1×1012 |
8×1011 |
1×1012 |
| Insulation resistance |
( ) |
109 |
109 |
109 |
109 |
| Operating temperture range |
('C) |
-25~85 |
-25~85 |
-25~85 |
-25~85 |
| Dielectric breakdown voltage |
kV/mm |
20~25 |
23~27 |
23~27 |
23~27 |
|
 |
 |
Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
|
 |
 |