GB-E-type Inter-Connector is a compression type, which consists of gold-plated filaments lined in the conductive part and of insulating silicone rubber on both sides. This type connector makes stable connection possible with lower resistance. GB-E type could replace soldering and also be used for PCBs, which need current capacity.

Outline Dimensions:

Dimensions and Tolerances:

Item Unit GB-E type  Pitch P mm 0.05+0.03/-0.01 0.1±0.05 0.2±0.05  Length L mm 2.0~25.0±0.2 50.1~80.0±0.5 120.1~150.0±1.0 200.1~250.0±1.6 25.1~50.0±0.3 80.1~120.0±0.8 150.1~200.0±1.3  Height* H mm 1.0~5.0±0.1 5.1~10.0±0.15 10.1~20.0±0.2  Width W mm 1.0~2.4±0.1   2.5~4.0±0.15  Filament diameter µm 30 40 40 Special design is available on request. *HW/2 Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Basic Properties:

Item Unit Values  Contact resistance* 0.1  Current carrying capacity mA 500  Insulation resistance (500V DC) M 1×10³  Operating temperature range °C -25~85 *The test is carried out with Shin-Etsu's own method.

Compression Curves:

Sample Size 0.1P�~10.0L�~2.0H�~1.0W Inner diameter of holder:1.0H�~1.0W Sample Size 0.1P�~50.0L�~1.0H�~1.0W PCB used: 2.0P, 1.0mm-width gold-plated electrode

Note: Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee. The quality of the connector, which has been already assembled, is out of guarantee. Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.