SEC/SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance.

Outline Dimensions:

Dimensions and Tolerances::

Item �@ Unit SEC type  Pitch P mm 0.05±0.03  Length L mm 2.0~20.0±0.15 150.1~200.0±0.8 20.1~90.0±0.65% 200.1~300.0±1.0 90.1~150.0±0.6  Height* H mm 1.5~5.0±0.1 5.1~20.0+0.15/-0.1 �@  Width W mm 1.5±0.1 2.0±0.1 2.5±0.15 3.0±0.15 3.5±0.15 4.0±0.15 4.5±0.15 5.0±0.15  Width of conductive layer Z mm 0.7±0.05 *HW/2 Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Basic Properties:

Item Component Unit SEC-WHX type SEC-NX type  Shore hardness A Insulator Conductor Edge insulation part(1) ISO7619 (TYPE A) 65~73 65~73 60~65 60~65 20~25 20~25 35~40 35~40  Compression set * % 15~20 15~20  Volume resistivity Insulator Conductor Edge insulation part , cm 1×1014 1×1014 1.3 1.0 1×1011 1×1011  Dielectric breakdown voltage Insulator insulation part kV/mm 23~27 23~27 23~27 23~27  Insulation resist.(500V DC) * M 1×10³ 1×10³  Operating temp. range �@ ºC -25~85 -25~85 (1)The hardness of the support material has alternatives of 20° and 35°. *The test is carried out with Shin-Etsu's own method.

Compression Curves:

sample size: SEC-WHX type 0.05P×50L×5H×2.6W×0.7Z electrodes used: 0.4mm-width gold-plated vs. no pattern processed gold-plated no holder