VCF-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which are fitted on both sides. This type is suitable for small- or middle-sized displays. While VCF type has translucent supportive solid rubber on the both sides, SG type has pink sponge rubber.

Outline Dimensions:

Chemical Resistance:

Chemical Solvent Light Transmittance (Before soaking) Light Transmittance (After soaking) Appearance change  Methanol 78.0% 78.0% None  Ethanol 77.9% 77.9%  Neutral Detergent 77.8% 77.7%  Leather wax 77.9% 78.7%  Engine oil 77.9% 78.2%  Chocolate 78.0% 78.1%  Regular gasoline 77.6% 76.8% Slightly swollen at edge  Special gasoline 77.8% 76.6%

General Characteristics:

Characteristics Item Characteristic value Unit Test method  Thermal characteristics Deflection temperature 126.8 °C JIS- K- 7207 Linear expanslon coefficient 8.0 10-5mm/mm/°C ASTM- D- 696 Heat shrinkage TD 0.15 % JIS- K- 6735 MD 0.10 % JIS- K- 6735 Flammability SE class   FMVSS- 302  Mechanical characteristics Tensile strength 300 kg/cm² JIS- K- 7113 Elongation 110 % JIS- K- 7113 Peel strength 1.3 kg/25mm JIS- K- 6854  Optical characteristics Light transmittance 78 % JIS- K- 7105 *FMVSS:Federal Motor Vehicle Safety Srandards Note: VC 908500 has been used as a test Sample.

Environment-proof Characteristics:

Test item Test condition Peeling Color change Dimensional Change Warp  Higt-temperature test 85°C(1000hrs) None None -0.03 % None 120°C(240hrs) None -0.04 %  Low-temperature test -40°C(240hrs) None None  Higt-temperature/higt-humidity test 60°C,95%RH(240hrs) None +0.02 % 80°C,95%RH(240hrs) None -0.02 %  Weatherabillity test 240hrs None - 480hrs Slight color change -  Thermal shock -40°C(1hr)?`85°C(1hr)×100cycles None -0.02 %  Heat cycle 85°C(2hrs)- Room temperature(2hrs) -40°C(2hrs)-Room temperature (2hrs)×20cycles 6 -0.02 % Note: VC 908300 used as a test Samle. Sample size 100�~20mm(100mm in the louver axial direction). Warp of the sample,placed on the aluminum place,was measured using a clearance gauge. The sunshine-type wearher mecer was used for the wearhecability rest with black panel rempecature of 63 deg.

VCF-Film Standard Grad:

TYPE Visible angle Louver angle Max. light transmittance angle Tickness Outer dimension  VC- 128500 120 ° 0 ° 0 ° 0.9 260×300  VC- 128510 10 ° 11 °  VC- 128518 18 ° 23 °  VC- 908500 90 ° 0 ° 0 ° 0.9  VC- 908510 10 ° 11 °  VC- 908518 18 ° 23 °  VC- 609500 60 ° 0 ° 0 ° 1.0  VC- 609510 10 ° 11 °  VC- 609518 18 ° 23 °

Note: Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee. The quality of the connector, which has been already assembled, is out of guarantee. Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.