 |
|
Semiconductor Device Inspection
|
Because of the low profile nature of elastomer based connector, Shin-Etsu MT type is widely adopted for the functional testing of high frequency semiconductors devices. MT type offers 1.0mm (typical) short signal path that yield RF characteristics unmatched by mechanical connector. As for reliability, our unique capabilities produce distinctive wire placement that make certain the multiple touch downs. From SAW filter to large CPU, MT type is the ideal test contact solution.
|
|
 |
MT-type series are anisotropic conductive sheet type, which consists of soft silicone rubber and of gold-plated metal filaments embedded densely into it. This type of Inter-Connector is suitable for inspecting and connecting IC packages such as BGA, QFP or SOP. Since MT-4X type has 4-time metal... more detail
|
 |
Tip of wire is protruded from the base elastomer for 20um and Ni/Au plating was done to improve contact. Initial contact starts at very low compressed stage thus reduce mechanical strain on device under test. Comparing to MT-T type, MT-P type has much improved durability (Depend on device type). more detail
|
 |
MT-T-E type is anisotropic conductive sheet type, which consists of
silicone rubber and of gold-plated metal wires embedded densely into
it. The metal wire which are projected from the silicone rubber
surface provide reliable conductive efficiency with low compression
load. This type is suitable for inspecting small devices because of
superior handling characteristic.
more detail
|
 |
MT-T-4X-E type is high-density anisotropic conductive sheet type,
which consists of silicone rubber and of gold-plated metal wires
embedded densely into it. The metal wires which are projected from
the silicone rubber surface provide reliable conductive efficiency
with low compression load. This type is suitable for inspecting
small devices because of superior handling characteristic.
more detail
|
 |
MAF-type Inter-Connector consists of multiple rows of metal fibers arranged symmetrically in a sheet of silicone rubber. This type is the thinnest of metal connectors. Various shapes are available because of punch-out manufacturing method applied. MAF-type connectors are used for extensive...more detail
|
|
|
|
Telecommunications
