 |
|
Inter-Connectors
 |
AF-type Inter-Connector consists of conductive carbon fibers, which are embedded symmetrically into a sheet of silicone rubber. Since AF type is extremely thin, it is applicable between electrodes in which there's little gap. Various shapes are available because of punch-out manufacturing method used. more detail
|
 |
Assist Carrier is the FPC/PCB carrier for device mounting process, consist of long proven heat-resistance sticky silicone rubber layer and newly developed non-silicone rubber layer along with the metal board. Both silicon and non-silicone rubber have great characteristics which compatible with Pb-free solder. more detail
|
 |
DM-type Inter-Connector is made up of silicone rubber and used as a protective presser foot or a spacer. The material, hardness, or additional specification (with adhesive/adhesive tape) can be custom-made. more detail
|
 |
GB-E-type Inter-Connector is a compression type, which consists of gold-plated filaments lined in the conductive part and of insulating silicone rubber on both sides. This type connector makes stable connection possible with lower resistance. more detail
|
 |
GB-MIC type Inter-Connector consists of a metal filament running in a straight and of silicone insulator rubber supporting it. Furthermore, another insulation silicone rubber surrounds the microphone to unify the connector part. more detail
|
 |
GB-Matrix type Inter-Connectors consist of multiple rows of metal filaments embedded symmetrically in a sheet of insulating silicone rubber. more detail
|
 |
GB-Speaker type is used to connect speaker(receiver) for cellular phone. Solder-free, easy speaker(receiver) connecting only by compressing the GB-Speaker type inter-connector between housing and PCB electrodes. more detail
|
 |
GB-U type Inter-Connector is a compression type, which is made up of gold-plated filaments embedded densely in U-shaped sponge silicone rubber. more detail
|
 |
JC-type Inter-Connector is a heat seal connector that is made up of a polyester film as a substrate, and carbon conductive lines printed on the film. JC-type is coated with an anisotropic conductive adhesive. JC-type is useful for LCD's applications. more detail
|
 |
JS-type Inter-Connectors consist of conductive silver/carbon traces printed on polyester film. Adhesive material, in which conductive particle is dispersed, is applied to the traces to heat-seal the connectors to other components. more detail
|
 |
L type inter-connectors are used for connecting PCBs to the traces of the LCDs which are on the same side as the viewing side, on the top of the glass. L type inter-connectors are particularly suitable for connecting PCBs to a dot matrix type LCD. more detail
|
 |
MAF-type Inter-Connector consists of multiple rows of metal fibers arranged symmetrically in a sheet of silicone rubber. This type is the thinnest of metal connectors. Various shapes are available because of punch-out manufacturing method applied. more detail
|
 |
MS type is low resistance-type Inter-Connector using silver particles in the conductive material. This type of connector is superior in contact stability and ideal for connecting between LCD and PCB, PCBs and non-solderable electrical parts. more detail
|
 |
Tip of wire is protruded from the base elastomer for 20um and Ni/Au plating was done to improve contact. Initial contact start at very low compressed stage thus reduce mechanical strain on device under test. more detail
|
 |
MT-type series are anisotropic conductive sheet type, which consists of soft silicone rubber and of gold-plated metal filaments embedded densely into it. This type of Inter-Connector is suitable for inspecting and connecting IC packages such as BGA, QFP or SOP. more detail
|
 |
Designed for production oriented applications, pin Contactor is embedded on plastic housing for easy handling. Based on highly reliable low resistance metal pin, PI type is suited for high frequency application. Available for both sides plunger and one side solder type. more detail
|
 |
S-type Inter-Connector consists of alternate layers of conductive and insulation silicone rubber. This compression-type connector makes "random connection" possible with high reliability. This type of connector is applicable for the small-sized display used in watch or camera. more detail
|
 |
SEC/SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance. more detail
|
 |
SG-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which is fitted on both sides. This type is suitable for small- or middle-sized displays. more detail
|
 |
SP-type Inter-Connector consists of alternate layers of conductive and insulating rubber and of soft rubber insulators fitted on both sides. Since SP type has lower resistance than SS/SG, it is particularly ideal for display with tall height, such as LCD with backlight. more detail
|
 |
SS-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which is fitted on both sides. This type is suitable for small- or middle-sized displays. more detail
|
 |
SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance. more detail
|
 |
Shin-Etsu VC-Film is louver sheet for view angle control and visibility improvement.
VC-Film is constructed of minute black silicone rubber louvers that are placed in a transparent silicone rubber. Two polycarbonate films are layered on outer surface. more detail
|
|
|
|
