S-type Inter-Connector consists of alternate layers of conductive and insulation silicone rubber. This compression-type connector makes "random connection" possible with high reliability. This type of connector is applicable for the small-sized display used in watch or camera.

Outline Dimensions:

Dimensions and Tolerances::

Item   Unit 0.05P type 0.10P type 0.18P type 0.25P type  Pitch P mm 0.05±0.03 0.10±0.04 0.18±0.05 0.25±0.05  Length L mm 1.0~5.0±0.1 70.1~120.0±0.4 5.1~30.0±0.2 120.1~200.0±0.6 30.1~70.0±0.3 200.1~300.0±0.8  Height* H mm 0.8~5.0±0.1 5.1~25.0+0.15/-0.1  Width without coat     0.2~5.0±0.08  Width with coat W mm 0.3~5.1±0.1  Width of Insulation coat Wi mm 0.05±0.03 *HW/2 Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Basic Properties:

Item Component Unit 0.05P type 0.10P type, 0.18P type, 0.25P type  Specific gravity Insulator Conductor Insulated both sides   1.15 1.15 1.15 1.15 1.25 1.15  Shore hardness A Insulator Conductor Insulated both sides ISO7619 (TYPE A) 65~73 60~65 65~73 65~73 63~67 65~73  Compression set % 15~20 15~20  Volume resistivity Insulator Conductor Insulated both sides , cm 1×1014 1.3 1×1014 1×1014 3~6 1×1014  Dielectric breakdown voltage Insulator Insulated both sides kV/mm 23~27 20~23 23~27 20~23  Insulation resistance(500V DC) M 1×10³ 1×10³  Operating temperature range   °C -25~85 -25~85 *The test is carried out with Shin-Etsu's own method.

Compression Curves:

sample size: 0.10P×20.0L×2.4H×2.0W

sample size: 0.10P×20.0L×2.4H×2.0W electrode used: 0.6 width gold-plated vs. no pattern processed gold-plated no holder

Note: Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee. The quality of the connector, which has been already assembled, is out of guarantee. Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.