Shin-Etsu
HomeProducts

Keypads
Inter-Connectors
AF Type
DM Type
GB-E Type
GB-MIC Type
GB-Matrix Type
GB-Speaker Type
GB-U Type
JC Type
JS Type
L Type
MAF Type
MS Type
MT-P Type
MT-T-E Type
MT-T-4X-E Type
MT Type
S Type
SEC Type
SG Type
SP Type
SS Type
SX Type
VC-FILM Type
Inter-Connectors
VC-Film
By Type
By Application

Print This Page
 SEC-type
SEC/SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance.

Outline Dimensions:
Dimensions and Tolerances::
Item Unit SEC type
 Pitch P mm 0.05±0.03
 Length L mm
2.0~20.0±0.15
150.1~200.0±0.8
20.1~90.0±0.65%
200.1~300.0±1.0
90.1~150.0±0.6
 Height* H mm
1.5~5.0±0.1 5.1~20.0+0.15/-0.1
 Width W mm
1.5±0.1
2.0±0.1
2.5±0.15
3.0±0.15
3.5±0.15
4.0±0.15
4.5±0.15
5.0±0.15
 Width of conductive layer Z mm 0.7±0.05
*HW/2
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.
Basic Properties:
Item Component Unit SEC-WHX type
 Shore hardness A Insulator
Conductor
Edge insulation part(1)
ISO7619
(TYPE A)
65~73
60~65
35~40
 Compression set * % 15~20
 Volume resistivity Insulator
Conductor
Edge insulation part
, cm 1×1014
1.3
1×1011
 Dielectric breakdown voltage Insulator
insulation part
kV/mm 23~27
23~27
 Insulation resist.(500V DC) * M 1×10³
 Operating temp. range ºC -25~85
(1)The hardness of the support material has alternatives of 20° and 35°.
*The test is carried out with Shin-Etsu's own method.
Compression Curves:
sample size: SEC-WHX type
0.05P×50L×5H×2.6W×0.7Z

electrodes used:
0.4mm-width gold-plated vs.
no pattern processed gold-plated no holder

Usage Example of Mobile Phone Usage Example of VC-Film Shin-Etsu Polymer America, Inc. Company Information Shin-Etsu Polymer Green Activities
Contact Us