SG-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which are fitted on both sides. This type is suitable for small- or middle-sized displays. While SS type has translucent supportive solid rubber on the both sides, SG type has pink sponge rubber.

Outline Dimensions:

Dimensions and Tolerances:

Item   Unit SG type  Pitch P mm 0.10±0.04   0.18±0.05   0.25±0.05  Length L mm 2.0~20.0±0.15 90.1~150.0±0.6 200.1~270.0±1.0 20.1~90.0±0.65% 150.1~200.0±0.8 270.1~300±1.5  Height* H mm 1.0~5.0±0.1   5.1~20.0+0.15/-0.1  Width(standard) W mm 1.2~2.3±0.1   2.4~4.5±0.15  Width of conductive layer Z mm 0.4±0.05(standard)   0.8±0.05(secondary standard) *HW/2 Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Basic Properties:

Item Component Unit SG type  Specific gravity Insulator Conductor Edge insulation part   1.15 1.25 0.6  Shore hardness A Insulator Conductor Edge insulation part ISO7619 (TYPE A) 65~73 63~67 17~23  Compression set * % 12~18  Volume resistivity Insulator Conductor Edge insulation part , cm 1×1014 3~6 1×1011  Dielectric breakdown voltage Insulator Edge insulation part kV/mm 23~27 2.0~2.5  Insulation resist.(500V DC) * M 1×10³  Operating temp. range   °C -25~85 *The test is carried out with Shin-Etsu's own method.

Compression Curves:

sample size: 0.10P×50.0L×5.0H×2.6W×0.4Z electrodes used: 0.4mm-width gold-plated vs. no pattern processed gold-plated no holder

Note: Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee. The quality of the connector, which has been already assembled, is out of guarantee. Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.