 |
|
SP-type
|
|
|
SP-type Inter-Connector consists of alternate layers of conductive and insulating rubber and of soft rubber insulators fitted on both sides. Since SP type has lower resistance than SS/SG, it is particularly ideal for display with tall height, such as LCD with backlight.
|
|
|
Outline Dimensions: |
 |
|
|
Dimensions and Tolerances:: |
|
|
| Item |
|
Unit |
0.05P type |
0.10P type |
| Pitch |
P |
mm |
|
| Length |
L |
mm |
2.0~20.0±0.15
20.1~90.0±0.65%
90.1~150.0±0.6 |
150.1~200.0±0.8
200.1~275.0±1.0 |
|
| Height* |
H |
mm |
1.0~5.0±0.1 5.1~20.0+0.15/-0.1 |
| Width |
W |
mm |
1.2~2.3±0.1 2.4~4.0±0.15 |
| Width of conductive layer |
Z |
mm |
0.3±0.05(standard) 0.6±0.05(secondary standard) |
**H>W/2
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.
|
|
Basic Properties: |
|
|
| Item |
Component |
Unit |
0.05P type |
0.10P type |
| Specific gravity |
Insulator
Conductor
Insulated both sides |
|
1.15
1.15
1.05 |
1.15
1.15
1.05 |
| Shore hardness A |
Insulator
Conductor
Insulated both sides |
ISO7619
(TYPE A) |
65~73
60~65
20~25 |
65~73
60~65
20~25 |
| Compression set |
* |
% |
15~20 |
12~18 |
| Volume resistivity |
Insulator
Conductor
Edge insulation part |
 , cm |
1×1014
1.3
8×1013 |
1×1014
1.3
8×1013 |
| Dielectric breakdown voltage |
Insulator
Edge insulation part |
kV/mm |
23~27
23~27 |
23~27
23~27 |
| Insulation resistance(500V DC) |
* |
M |
1×10³ |
1×10³ |
| Operating temperature range |
|
°C |
-25~85 |
-25~85 |
*The test is carried out with Shin-Etsu's own method.
|
|
Compression Curves: |
|
|
 |
|
 |
sample size:
0.05P×50.0L×5.0H×2.6W×0.3Z |
|
sample size:
0.05/0.10P×50.0L×5.0H×2.6W×0.3Z
electrode used:
0.4mm-width gold-plated vs.
no pattern processed gold plated |
sample size:
0.05/0.10P×50.0L×5.0H×2.6W×0.3Z
electrode used:
0.4mm-width gold-plated vs.
no pattern processed gold-plated
no holder |
Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
|
|
|
