JC-type

JC type Inter-Connector is a heat seal connector that is made up of a polyester film as a substrate, and carbon conductive lines printed on the film. JC type is coated with an anisotropic conductive adhesive. JC type is useful for LCD’s applications.

Outline Dimensions:

JC-type Outline dimensions 01
  • JC-type of Inter-Connector

Application

Dimension and Tolerance:

Item Unit Standard
Size L x H mm 100 x 400
Dimension tolerance Length (L) mm ±0.25
±0.25(10≦H≦120), ±0.5(120<H≦200), ±1.0(200<H≦400)
Height (H)
Width of conductor (Tc) mm 0.25
Pitch tolerance ±0.05(P<1.0)±0.10(P≧1.0)
Accumulative pitch (TP) mm ±0.1(TP≦100)
Thickness of base film (T) μm 25
Pitch (P) mm ≧0.5
Thickness of cover film (option) μm 12 or 25
*Max. size depend on pitch.
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Construction:

Base film Polyester
Conductive lines Thermosetting resin carbon ink
Adhesive Carbon particles
Thermoplastic synthetic rubber adhesive
Insulation layer Printed themoplastic synthetic rubber
*Optional: polyester cover film, polyester stiffener for ZIF connector.

Basic Properties:

Item Properties Conditions
Condutive resistance ≦100Ω/sqr 10~30ºC, 30~80%RH
Insulation resistance ≧100MΩ 10~30ºC, 30~80%RH
Peel strength 2.94N/cm 90°peel, 100 mm/min.
Storage time 6 months max. Sealed, 0~40ºC, RH≦50%

Bonding Conditions Range:

Adhesive temperature (1) 110~130ºC
Pressure 2.0±0.5MPa
Time (2) 5±2sec.
(1) This temperature should be applied only to the bonding area.
(2) Time (2) means keeping one at reaching the adhesive temperature (1)
*Surface should be free of dust and contamination.
*Above “BONDING CONDITION” is not specification. It is only condition which are got in our test. Your proper condition depends on heatsealing machine, material of jig, thichness and material of cushion, size and material of adherent, environment in your process and so on. Evaluation in your process should be necessary by yourself.
*The test is carried out with Shin-Etsu’s own method.
*The above conditions are provided only for reference and are based upon our company’s in-house tests. Applicable conditions will vary depending on the thermal capacity of equipment, cushioning material, thickness, adhesive body size, material, exoergic properties of the lower supporting jig, and a variety of other environmental factors. As such, the above conditions should be used only for reference and implemented only after thorough testing.
Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn’t guarantee the usage of the connector.
2019-11-10T23:41:35-08:00
Go to Top