MS-type

MS type is low resistance-type Inter-Connector using silver particles in the conductive material. This type of connector is superior in contact stability and ideal for connecting between LCD and PCB, PCBs and non-solderable electrical parts. MS type has alternatives of low load type, what is called MS-G and low resistance type with wide zebra, which is MS-Z.

Outline Dimensions:

  • MS-type of Inter-Connector
Inquiry

Application

  • LCD module

Dimension and Tolerance:

Item Unit MS-G MS-Z
Pitch P mm 0.10±0.05
Length L mm 3.0~30.0±0.25
Height H mm 1.0~10.0±0.10 0.5~10.0±0.10
Width W mm 1.3~2.5±0.10 0.6~1.6±0.10
Core width Z mm 0.5~1.5
Width of insulation coat Wi mm 0.01 0.05
*HW/2
*Gas barrier bag is the standard packing style.
*Please refer to the MS type technical material when handling.
*Design guide is available as a reference to determine dimensions.
*MS-G spec.(0.4Z) is also available.
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941.

Basic Properties:

Item Unit MS-G MS-Z
Volume resistivity * Ω/m 1 x 10-5 1 x 10-5
Insulation resistance * 1 x 103 1 x 103
Compression set % ≦10 ≦10
Operating temperature range ºC -25~85 -25~85
The test method is based upon JIS K 6249.
The test marked with ※ is carried out with Shin-Etsu’s own method.

Compression Curves

Compression curves
Sample size
MS-Z 0.1P x 9.5L x 3.2H x 1.6W
MS-G 0.1P x 9.5L x 3.2H x 1.6W x 0.8Z

Resistance-Compressibility Curves

Resistance-compressibility curves
Sample size
MS-Z 0.1P x 9.5L x 3.2H x 1.6W
MS-G 0.1P x 9.5L x 3.2H x 1.6W x 0.8Z
Note:
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn’t guarantee the usage of the connector.
2019-11-10T23:39:56-08:00